Double Glazing Installation Guide

Double Glazing Installation Guide

Double Glazing on The Web knows all there is to know about double glazing installation. Chehelsoton Iran have spent years working within the double glazing industry and have built a wealth of knowledge on all things double glazing. Let us fill you in on what to expect with our double glazing installation guide.

Window Installation

You’ve chosen the colour, the handle colour and you’ve decided to go with A-rated windows with maximum security locking systems. The next step, installation.

When the fitters arrive they will first make sure they have safe access to the window. Don’t worry about moving heavy furniture; they will move what they have to and carefully prepare the working area for a clean and tidy installation.

You’d be surprised at what fitters have to work around from day to day, so you don’t have to worry. After they’ve checked access is OK, they will lay down their dust sheet.

All good double glazing installers will have a dust sheet, however it is a good idea for you to check before they start that there is one laid down.

If you’re having a sash window, for example, years of dust builds up in the sash box. This dust goes everywhere. If they don’t have a sheet, either ask if they can get one or give them your own if you have one from previous decorating or DIY improvements. You don’t want your furniture or floor covered in dust.

Removal of Old Windows

Assuming you are having the whole window replaced, they will double check the measurements of the new frame, then all being well take the old one out.

Once the window frame is firmly installed into the brickwork, the installer will carefully place the glass sealed unit into the aperture and then proceed to gently fit the beads to enclose the glass in the frame.

They may use wedges to ensure a snug fit between the glass and internal uPVC frame however the surveyor would have ensured the glass was ordered perfectly to the size of the window.

Ensuring The Perfect Finish

Once the window has been installed, the fitter will silicone and trim from the inside and outside to give the window a perfect finish. They will use colour matched trims and sealants so that it is not noticeable where the window meets the brickwork.

It is often worth checking over the perimeter of the window installation to ensure that there are no visible gaps in sealant and the finish is as immaculate as you would expect.

Time To Tidy Up

Once the installation is complete, the installers should take away their tools, tidy the working area and often hoover the floors to leave your home as spick and span as when they first arrived. Be sure to check the working area before they leave to ensure it is left in a clean and tidy state.

If there are any moving parts or special features they will test them and show you how they work. Finally, with a smile they’ll be off into the sunset.

uPVC Door Installations

After searching through the many uPVC door styles and securing a fantastic price, you have finally found the perfect new door for your home. You may find yourself asking however, just how long will it take to install my door?

Home improvements can be time consuming -interrupting your day to day schedule. So here at Double Glazing on the Web, we understand that arranging an installation date to best suit you is essential.

Our local suppliers will be able to appoint an installation date which is convenient for you, so that you can experience as little disruption to your schedule a possible.

The length of your uPVC door installation process will be influenced by the products you have chosen to be fitted.

The following information shows the average timescales of uPVC doors, but these of course are subject to manufacturing times and installation schedules. It is always best to check timescales with your double glazing supplier before placing an order with them.

Installing and Retrofitting Double Glazed Windows

 Double glazed windows are considerably more expensive than standard windows. While their extra expense is justified when installing on a new building, it may not be justified for window replacement:

If a window needs replacing because the timber frame has rotted or for some other reason, replacing it with a double glazed window is a viable option.

If a large window is in good nick, but allows too much heat transference or does not dampen external noises, it may be better to retrofit it with uPVC window than to replace it with a new double glazed window.

 As mentioned above, it is the space between the window panes that provides the thermal and noise reduction properties of double glazed windows. As a rule, the greater the gap between window panes, the greater the insulation, especially acoustic. Standard double glazed windows usually have a gap of 6mm. Retrofitted uPVC windows have their own discreet frames and removable fastening systems and are set at a distance of approximately 100mm from an existing window. This can make a noticeable difference especially to your room’s acoustics. According to studies, they can reduce perceived noise levels by up to 75 percent.

The ultimate solution for problem areas, such as next to busy roads or schools, is to combine double glazed windows with uPVC retrofit windows. If direct sunlight is a problem, the windows should also have some sort of UV blockage and/or tinting. If you’re replacing your windows, also consider buying double glazed windows with low-e glass on the outer pane.

Both double glazed and PVC windows lose much of their thermal and acoustic efficiency if not installed properly. For this reason, the best way to make sure you are getting the most for your money is to let the professionals handle your installation rather than attempt to do it yourself. Rather than save a little money by doing a risky DIY installation, save money by getting three competitive quotes using our free Get a Quote service.

This article is about how to install a PVC window by chehelsoton Iran, as to improve the appearance of your house and to increase its insulation. PVC windows are very efficient, due to the smart design, and durable. If you install them properly you will enjoy using them for a long period of time. Installing a PVC window is not the hardest job in the world, but it requires attention and hard-work from the diy-er, as well as moderate knowledge about this task.

This article is mainly about installing a PVC window in a new construction, but you can use these techniques for replacing an old window. In the latter case, you have to remove first the openers, then the glass and last the window frame. Removing the frame might be a little difficult, but you have to proceed in such a manner as to minimize damage to walls.